NGOK Conveyor_SMT Peripheral Series-Suzhou Forward Machinery Manufacturing Co.

Product Features

· Mainly used in the back of SMT production line inspection equipment (SPI/AOI/XZ), according to the NG/OK signal given by the inspection equipment, the NG PCB is jacked up and the OK PCB is transported to the next process.

· The control mode adopts PLC control, linear mode or NG/OK mode can be switched.

· Elevation mode adopts cylinder top lifting type, can store 1-8 pieces of boards.

· Equipped with a standard SMEMA signaling port for in-line connection with other equipment

Product Parameters

Descriptive	This equipment can be used for AOI to separate the good and bad boards, and the good boards can continue to run unhindered during inspection.
Belt Type	Antistatic Belt
Conveying Speed	0.5-20m/min
Power Supply	110 VAC or 220 VAC; single phase
Throttle	Maximum 100VA
Number of boards	3-8 pieces or customer specified
Board Spacing	20mm
Conveyor Height	900±20 mm or as specified by the customer
Transmission Direction	Left to right or right to left